Youcan remove the resistors or replace them with a lower rating, 10 watt resistors are fine. If there aren't any resistors inline with your tweeters you can replace the tweeters them with something just 2 or 3 db more sensitive. Metal dome tweeters are good for aging ears as they give a little more "pop." Tel (818) 895-5776. ----------. In the end, instead of recommending further break-in, Dr. Olive requested the speakers be returned to Infinity where they were tested, found to exhibit excessive brightness as I described, and adjusted/parts-replaced to match their reference unit. FactoryKlipsch Speaker Tweeter Part # 1061375. Voice coil: 1" (25mm) Size: 6.625" x 6.625" (168mm x 168mm) Magnet diameter: 1.375" (35mm) Impedance: 8 ohms, DCR: 5.4 ohms. Original Klipsch factory part. Please check your model before ordering to make sure you are getting the correct tweeter. See the "Fits Models" tab for all applicable cabinet Muchlike the new KEF R3 Meta speakers in this list, KEF has updated its higher-end Reference 1 speaker with its innovative Metamaterial Absorption Technology (MAT), which absorbs around 99 per cent of the unwanted, distorting sound waves from the back of the tweeter. And once again, it's done with great success. Anoptional 6-speaker stereo system included tweeters in the front doors. These speakers are also easy to remove, and offer a handy mounting spot should you want to add aftermarket units. You'll have to fashion a mounting plate for the new tweeter, or use our universal backstraps (or silicone or hot glue) to secure them in the doors. TweetersWoofers, mid-range speakers, and tweeters are all types of loudspeakers. Most often, all three types of speakers are mounted in a single enclosure, but you can also find each in discrete enclosures. Let's take a closer look at how they work. 9Aw8m.

what does a tweeter do in a speaker